Carbon mountain wheels - Outline decals

Corima WS Black wheels 32mm tires/pads 2023

The Corima WS Black 32mm clincher illustrates CORIMA's expertise and experience in carbon wheel design so well. It's the perfect balance between performance and comfort.

In 32mm, the WS Black will appeal to cyclists looking for performance during races or training rides with a significant drop. This WS Black has all the qualities required to meet the expectations of both demanding competitors and those of cyclists who want to have fun while riding.

• 28" tire (700c standard)
• Rim profile: 32mm (low for climber/all-rounder)
• Rim width: 26mm
• Axle: Quick release Ø9 x 100mm
• Weight: 635g + 865g
• Surface finish: 3K
• Black bent spokes: 18 front and 20 rear

Total weight of the pair (verified at the LVR Cycles workshop): 1500 grams.

Color of the stickers: "outlined white".

Delivered with

• Pair of brake pads
• Protective cover
• spoke wrench
• valve extender
• "Light" quick release

inflation pressure

Do not remove the tire with a metal tool.

The minimum tire section is 23 mm and maximum 32 mm.

For comfort and performance, we recommend fitting tires with a section of 23 mm for our 22.6 mm wide rims and 25 mm for our 26 mm wide rims.

The braided CORIMA rim tape supplied as standard is mandatory. If it is damaged, it should be changed.

CORIMA clincher wheels are not compatible with tubeless conversion kits.

Only tires with inner tubes are accepted (except latex inner tubes). Inflation devices with Co2 cartridges are authorized only if the flow rate is adjustable. Instant inflation cartridges are prohibited with CORIMA wheels.

Important: If the tire manufacturer indicates an inflation pressure lower than that of the table, the lower value must be used.

23mm: 7.8 bar 113 Psi
24mm: 7.5 bar 109 Psi
25mm: 7.3 bar 106 Psi
26mm: 7.0 bar 102 Psi
27mm: 6.8 bar 99 Psi
28mm: 6.6 bar 95 Psi
29mm: 6.3 bar 92 Psi
31mm: 6.1 bar 88 Psi
31mm: 5.8 bar 85 Psi
32mm: 5.6 bar 81 Psi

S Black aluminum hubs

The "S Black" version in aluminum benefits from the latest innovations with, for example, a 30-tooth transmission crown and a Ø 17 mm axle in titanium/aluminum.

They are machined in the best alloys by specialists in precision mechanics equipped with the most modern machining machines.

twist box

The inside of CORIMA rims conceals the hallmark of CORIMA products! Our wheels are designed with a structural foam inside allowing the integration of a unidirectional carbon fiber torsion box.

This concept of torsion box, invented and patented by CORIMA in the early 90s, allows the manufacture of high performance composite wheels benefiting from a rigidity that no other hollow product can match. This rigidity allows a perfect transmission of the cyclist's power for always more performance and a better resistance to the runout of the rim over time. This unique control also makes it possible to absorb noise and vibrations for better comfort.

All CORIMA wheels are handcrafted, which makes them unique.