Pay in 4X without fees from 200 to €2,000 of purchase

CORIMA Carbon wheels WS Black 58mm tubetype/rim brake 2024


Triathlon / CLM carbon wheels - Outline stickers

€1,649.00 Incl. Tax
Wheels
Freehub
Size charts
Free loyalty card

Creation when you open your customer account.

Full assembly & anti-theft marking offered

Our bike technicians at your service.

Trade-in of your bicycle (free estimate)

Finance this purchase with your used bike.

Quantity
Manufacturing on demand (about 2 months)

Corima WS Black wheels 58mm tires/pads 2024

The Corima WS Black 58mm clincher illustrates CORIMA's mastery and experience in carbon wheel design so well.

It's the perfect balance between performance and comfort. In 58mm, the WS Black will appeal to cyclists looking for speed on Time Trial or Triathlon courses. This WS Black in pad braking has all the qualities required to meet the expectations of both demanding competitors and those of cyclists who want to have fun while riding.

Each CORIMA front/rear wheel in pad braking is delivered with a pair of CORIMA brake pads compatible with classic Shimano ® / Sram® brake supports.

  • 28” tire (standard 700c)
  • Choice of Shimano HG 11-speed or SRAM XDR 12-speed
  • Profile: 58MM
  • Rim width: 26mm
  • Front axle: Quick release Ø9 x 100mm
  • Rear axle: Quick release Ø9 x 130mm
  • Front weight: 760 g
  • Rear weight: 990 g
  • Surface finish: 3K
  • Front crank spokes: 18
  • Rear crank spokes: 20

Total weight of the pair (checked at the LVR Cycles workshop): 1750 grams.

Color of stickers: “white cut out”.

Delivered with

  • Pair of brake pads
  • Protective cover
  • Spoke wrench
  • Valve extender
  • “Light” quick release

Inflation pressure

Do not remove the tire with a metal tool.

The minimum tire section is 23 mm and maximum 32 mm.

For comfort and performance, we recommend the fitting of 23 mm section tires for our 22.6 mm wide rims and 25 mm for our 26 mm wide rims.

The original braided CORIMA rim tape supplied is mandatory. If it is damaged, it should be changed.

CORIMA clincher wheels are not compatible with tubeless conversion kits.

Only tires with inner tubes are accepted (except latex inner tubes). Inflation means with Co2 cartridges are authorized only if the flow rate is adjustable. Instant inflation cartridges are prohibited with CORIMA wheels.

Important: If the tire manufacturer indicates an inflation pressure lower than that in the table, the lowest value must be used.

23mm: 7.8 bar 113 Psi
24mm: 7.5 bar 109 Psi
25mm: 7.3 bar 106 Psi
26mm: 7.0 bar 102 Psi
27mm: 6.8 bar 99 Psi
28mm: 6.6 bar 95 Psi
29mm: 6.3 bar 92 Psi
31mm: 6.1 bar 88 Psi
31mm: 5.8 bar 85 Psi
32mm: 5.6 bar 81 Psi

S Black aluminum hubs

The "S Black" aluminum version benefits from the latest innovations with, for example, a 30-tooth transmission crown and a Ø 17 mm titanium/aluminum axle.

They are machined from the best alloys by precision mechanics specialists equipped with the most modern machining machines.

Torsion box

The inside of CORIMA rims conceals the trademark of CORIMA products! Our wheels are designed with structural foam inside to integrate a unidirectional carbon fiber torsion box.

This torsion box concept, invented and patented by CORIMA in the early 1990s, allows the manufacture of high-performance composite wheels benefiting from rigidity that no other hollow product can match. This rigidity allows perfect transmission of the cyclist's power for even more performance and better resistance to the runout of the rim over time. This unique control also makes it possible to absorb noise and vibrations for better comfort.

All CORIMA wheels are handmade, which makes them unique.

Data sheet

Number of speeds
11 speeds
12 speeds
Material
Carbon
Type of tyre
Tubetype
Rim profile
High
Braking
Rim brakes

Do you know this product?

Your review is important. Help others to choose better!

chat Comments (0)