Enve SES 100 PRO white: the 100mm carbon front wheel designed for triathlon and time trials

A high-performance aero wheel, optimized for 28mm tires and the pursuit of maximum speed.

The Enve SES 100 PRO white front wheel is a 100mm carbon wheel designed for pure speed, time trials, and triathlons. Deep, fast, and uncompromising, it was developed to offer maximum aerodynamic advantage on courses where high-speed performance is essential.

Already proven in World Tour time trials and Ironman victories, the SES 100 PRO combines a very high rim profile, a 22mm internal width, and aerodynamic optimization around 28mm tires. The goal is clear: to reduce drag, maintain stability, and allow the rider to remain confident even at very high speeds.

With its ENVE INNERDRIVE PRO hub, ENVE PRO ceramic bearings, tubeless compatibility and a claimed total weight of 815g including rim tape and valve, the SES 100 PRO is a front wheel designed for athletes seeking a clear speed gain in triathlon and time trials.

Profile

100mm carbon rim

The ENVE SES 100 PRO features a very deep 100mm profile, designed to maximize aerodynamic efficiency. It is intended for fast courses, time trials, and disciplines where every watt saved counts.

A front wheel designed for speed

The SES 100 PRO is ENVE's front-wheel answer to the SES Disc PRO rear wheel. It allows for a high-speed build for triathlon and time trials, with a setup designed for speed and control.

High-speed stability

Despite its 100mm profile, the SES 100 PRO was developed to maintain stable and confidence-inspiring handling. It aims to offer efficient performance on fast straightaways, but also sufficient control in corners and during acceleration.

Aerodynamics

Optimized for 28mm tires

The ENVE SES 100 PRO front wheel has been optimized around 28mm tires. This modern section allows for a combination of aerodynamic efficiency, performance, comfort and grip, in line with current triathlon and time trial standards.

Real-world performance on the road

The SES PRO range was developed to deliver gains in real-world conditions, with wider tires and modern setups. The 22mm internal width allows for efficient use of 27-28mm tires.

Ideal pairing with the SES Disc PRO

The SES 100 PRO is designed to work in conjunction with the ENVE SES Disc PRO rear wheel. Together, they form a highly aerodynamic setup, designed for events where speed, efficiency, and stability are paramount.

Construction

ENVE INNERDRIVE PRO Hub

The wheel is fitted with an ENVE INNERDRIVE PRO hub, designed for smoothness, efficiency, and reliability. It fits into the high-end approach of the SES PRO series, which is geared towards performance and efficiency.

ENVE PRO ceramic bearings

ENVE PRO ceramic bearings contribute to smooth rotation and overall wheel efficiency. They are designed for cyclists seeking a fast, precise, and high-performance wheel.

Alpina Ultralite Silver Aero Spokes

The SES 100 PRO uses Alpina Ultralite Silver Aero R5 Straight Pull TCX Oval-Head spokes, paired with Alpina Nylock Brass nipples. This build aims to combine aerodynamic performance, strength, and reliability.

Made in the USA

Like ENVE's premium wheels, the SES 100 PRO is manufactured in Ogden, Utah, USA. ENVE brings design, research and development, testing, manufacturing, assembly, and customer support under one roof to control every step of the process.

Tires and tubeless

Tubeless compatible only

The ENVE SES 100 PRO is compatible only with tubeless tires. This choice allows you to take advantage of the benefits of tubeless tires in terms of performance, comfort, pressure, and puncture resistance.

Recommended width: 27 to 28 mm

The wheel is optimized for 27-28 mm tires, with a minimum width of 25 mm. This range provides the best balance between aerodynamics, rolling resistance, and dynamic behavior.

Maximum pressure

The maximum pressure indicated is 100 PSI, or 6.8 bar, or the maximum pressure recommended by the tire manufacturer if lower.

Braking and standards

Center Lock Braking

The ENVE SES 100 PRO front wheel is compatible with Center Lock brake discs. This modern standard ensures a clean, reliable, and suitable mounting for triathlon and time trial bikes with disc brakes.

Front axle 12x100 mm

The front hub adopts a 12x100 mm axle spacing, compatible with modern road, triathlon and time trial frames and forks equipped with disc brakes.

Technical specifications

Rim

• Model: ENVE SES 100 PRO
• Type: Carbon front wheel
• Rim height: 100 mm
• Internal width: 22 mm
• Tire compatibility: tubeless only
• Recommended tire width: 27 to 28 mm
• Minimum tire width: 25 mm
• Maximum pressure: 100 PSI / 6.8 bar

Hub and spokes

• Hub: ENVE INNERDRIVE PRO
• Bearings: ENVE PRO Ceramic Bearings
• Center distance: 12x100 mm
• Spokes: Alpina Ultralite Silver Aero R5 Straight Pull TCX Oval-Head
• Spoke length: 226 mm non-drive side / 228 mm drive side
• spoke tension: 120 kgf
• Nuts: Alpina Nylock Brass

Braking

• Brake type: disc
• Disc mounting: Center Lock

Weight

• Rim weight: 590 g
• Complete wheel weight: 815 g including rim tape and valve

Recommended use

• Triathlon
• Time trial
• Fast and rolling courses
• Timed events
• Triathlon bikes with disc brakes
• Time trial bikes with disc brakes
• Cyclists looking for a highly aerodynamic and high-performance front wheel

Why choose the ENVE SES 100 PRO front wheel?

• 100mm carbon front wheel designed for pure speed
• Very deep profile to maximize aerodynamic advantage
• Optimized for 28mm tires
• Internal width of 22 mm
• ENVE INNERDRIVE PRO Hub
• ENVE PRO ceramic bearings
• Tubeless compatibility only
• Center Lock Braking
• Front bolt pattern 12x100 mm
• The advertised total weight is 815g including the valve and rim tape.
• Already proven in World Tour time trials and Ironman victories
• Ideal match with the ENVE SES Disc PRO rear wheel
• Premium ENVE manufacturing in Ogden, Utah, USA