Contact us for a personalized quote [email protected]
EU companies: VAT-free purchase available [email protected]
Need advice before your purchase? [email protected]
By promoting lively acceleration, the new Shimano DURA-ACE R9270 C36 wheelset will revolutionize your experience of climbing, turning, and even returning in traffic. Indeed, it is not only the total weight of a wheel that matters, but also its location on the wheel. The all-new design of the C36 saves weight, but it is especially the rim that benefits. The result: a responsive wheelset that can transform your ride.
With a lighter and wider full carbon rim, as well as a lighter hub, the new DURA-ACE C36 won't dread successive climbs. With a height of 36 mm, the new rim still offers good aerodynamic efficiency despite its reduced weight. The hub features an alloy freehub body and a new engagement mechanism for greater rigidity.
Use: Road
Wheel size: 28"
Tire type: rigid tire or flexible tire
Number of spokes: 24
Brake system: Center Lock disc
Tubeless system: TL/UST
Rim:
Type: D2
Rim flange: with hook
Dimensions (ETRTO): 21-622
Rim width, interior: 21 mm
Rim width, exterior: 28 mm
Rim height: 36 mm
Valve port diameter: SV (6.5 mm)
Rim material: carbon (CFRP)
Front hub:
Width: 12 x 100 mm thru axle
Bearing: tapered bearing
Hub body material: aluminum
Rear hub:
Width: 12 x 142 mm thru axle
Bearing: tapered bearing
Hub body material: aluminum
Freewheel material: aluminum
Freewheel system: direct drive
Rays:
Front wheel interlacing: double crossed
Rear wheel interlacement: OPTBAL (2:1)
Spoke type: Straightpull / reinforced (2.0-1.5-2.0)
Spokes material: stainless steel
Nut material: aluminum
Recommended tire width: 25-622 to 32-622
The shape of the Shimano D2 rims has been optimized to cope with frontal and side winds. Extensive wind tunnel and road studies have shown that a wide rim profile with deep rim tape and flow angles of 0 to 15 degrees reduce air resistance the most. At the same time, this rim shape increases the lateral rigidity of the wheel and improves its vertical flexibility, which guarantees more control, comfort and durability.
Cup and Cone Bearing
The load capacity of conical type angular contact ball bearings (Cup & Cone) is higher than that of sealed industrial bearings, because they distribute lateral and vertical forces better and therefore operate particularly evenly and durable. They are also easier to adjust, maintain and replace.
E-Thru is a tool-free thru-axle system from Shimano that optimizes the stiffness-to-weight ratio and allows easy handling thanks to its reliable internal cam mechanism. It is characterized by high torsional resistance and thus allows cornering at high speed. E-Thru hubs and thru axles are available in matching widths for front and rear.
Direct Engagement
Shimano 's Direct-Engagement freewheel is a toothed disc freewheel that has the advantage of a much larger contact area than ratchet systems. This makes training more rigid. In addition, thanks to its spiral shape, the outer toothed disk and the toothed disk of the hub mesh securely with each other. This results in highly efficient and reliable energy transfer.
Shimano OPTBAL is a type of asymmetrical rear spoke that uses more spokes on the cassette side than on the opposite side. Symmetrical 1:1 shelving can, in combination with modern cassettes with larger dimensions, result in uneven shelf tension, which places excessive strain on the shelves on the right. These spokes are therefore more likely to break or their nuts to come loose. OPTBAL counteracts this tendency, balances the tension of the spokes and thus increases the rigidity, stability and durability of the wheel.
WH-R9270-C36-TL-F (front)
WH-R9270-C36-TL-R (rear)
1 x Shimano Dura-Ace WH-R9270-C36-TL wheelset (front and rear)
2 x tubeless rim tapes (pre-installed)
Black/set of 28" (front 12x100 + rear 12x142) Shimano Road 12 speed
Data sheet
Product condition