RockShox TL-PUMP-HP6-A1: a high-pressure pump up to 600 psi

A high-pressure pump for precisely adjusting RockShox suspensions

The RockShox 600 psi high-pressure pump TL-PUMP-HP6-A1 is designed for servicing suspension forks and air shocks requiring pressures above 300 PSI. It is particularly well-suited for servicing current RockShox rear shocks and BoXXer World Cup forks.

Its maximum capacity reaches 600 PSI, or 41.4 bar according to the provided data. It has an analog pressure gauge to monitor the pressure during inflation, as well as a purge button to gradually lower the pressure.

The flexible rubber hose can be angled for easy access to the valves. The pump also features an ergonomic handle and a compact design suitable for storage in a backpack or toolbox.

Very high pressure

Maximum pressure of 600 PSI

The pump is designed to achieve a maximum pressure of 600 PSI.

Equivalent value in bar

The information provided indicates a maximum pressure of 41.4 bar. Another presentation mentions 40 bar, a rounded value corresponding to the same very high pressure usage category.

Pressures above 300 PSI

Current RockShox rear shocks may require IFP pressures above 300 PSI, making it necessary to use a pump specifically designed for this range.

Rear shock absorber maintenance

IFP pressure adjustment

The pump is suitable for operations requiring IFP pressure adjustment of compatible RockShox rear shocks.

Specific maintenance tool

Its 600 PSI capacity exceeds that of a conventional high-pressure pump limited to 300 or 350 PSI.

Workshop use

This pressure range makes the pump particularly suitable for maintenance and service operations carried out in a suitable environment.

BoXXer World Cup Compatibility

Fork maintenance

RockShox states that the pump is suitable for servicing compatible BoXXer World Cup forks.

Air suspension adjustment

It can be used to repressurize the air chambers of forks and shock absorbers that meet its specifications.

Analog pressure gauge

Pressure reading

The pump is equipped with an analog pressure gauge allowing you to monitor the pressure increase during inflation.

High pressure graduation

The display is designed to cover the full range up to 600 PSI.

Adjustment control

The pressure gauge allows you to stop the inflation when the desired value is reached, then use the purge button to fine-tune the setting if necessary.

Purge button

Pressure reduction

A button allows a small amount of air to be released when the pressure obtained exceeds the desired value.

Gradual adjustment

This function facilitates the precise adjustment of a fork or shock absorber after the inflation phase.

Flexible connection

Rubber connection

The fitting uses a flexible rubber construction.

Connection orientation

The swivel fitting makes it easier to access valves positioned near a linkage, frame tube or other component.

Pump operation

The flexibility of the fitting limits the need to directly align the pump body with the valve.

Ergonomic handle

Getting started

The pump has an ergonomic handle designed to provide suitable support during inflation operations at very high pressure.

Repeated use

This shape facilitates the movements necessary to achieve the high pressures required by certain components.

Compact size

Easy storage

The pump has a compact design that allows it to be stored in a toolbox or backpack.

Transportation

Its limited size makes it easy to move between the workshop, racing areas and maintenance locations.

Advertised weight of 253 g

The stated weight is 253 g.

RockShox Identification

Model ID

The model identifier provided by RockShox is TL-PUMP-HP6-A1.

Usage category

The pump belongs to the category of inflation tools intended for servicing RockShox suspensions.

Precautions for use

Checking the prescribed pressure

Before any intervention, the target pressure must be checked in the technical documentation of the component concerned.

Use appropriate for the service

IFP pressures and internal operations on a shock absorber may require technical knowledge, specific tools and adherence to RockShox procedures.

Do not exceed the component limits

The pump's 600 PSI capacity does not mean that every fork or shock absorber can withstand that pressure. The component's own limit must always be respected.

Technical specifications

Identification

• Product: RockShox high-pressure pump for forks and shocks
• Model ID: TL-PUMP-HP6-A1
• Application: Air suspension maintenance

Pressure

• Maximum pressure: 600 PSI
• Maximum pressure indicated: 41.4 bar
• Also mentioned in the round value: 40 bar
• Suitable for pressures above 300 PSI
• Deflation button: yes

Manometer

• Type: analog
• Reads up to 600 PSI

Construction and ergonomics

• Flexible connection: yes
• Adjustable rubber fitting: yes
• Ergonomic handle: yes
• Compact size: yes

Weight

• Advertised weight: 253 g
• Size: One size

Announced compatibilities

• Compatible RockShox suspension forks
• Compatible RockShox rear shocks
• BoXXer World Cup Fork Maintenance
• IFP pressure settings above 300 PSI

Recommended use

• RockShox rear shock maintenance
• IFP pressure adjustment
• BoXXer World Cup fork maintenance
• Forks and shock absorbers requiring very high pressure
• Workshop use
• Technical interventions on air suspensions
• Transport in a backpack or toolbox

Why choose the RockShox TL-PUMP-HP6-A1 pump?

• Maximum pressure of 600 PSI
• Capacity suitable for IFP pressures above 300 PSI
• Designed for servicing current RockShox rear shocks
• Adapted for use with BoXXer World Cup forks
• Integrated analog pressure gauge
• Bleed button to reduce pressure
• Flexible rubber fitting
• Adjustable fitting for easy access to the valves
• Ergonomic handle
• Compact size
• Advertised weight of 253 g
• Model ID RockShox TL-PUMP-HP6-A1