Mondraker Zendit RR S vortex gray 2027

Mondraker Zendit RR S electric mountain bike, vortex grey, 2027

The Mondraker Zendit RR S vortex grey 2027 is Mondraker 's new flagship e-MTB. It sets a new performance standard thanks to a brand-new frame and a completely redesigned ZERO suspension system, seamlessly integrated with the powerful Avinox system. Designed for aggressive riding on the most demanding climbs and the most technical descents, it is the culmination of over 11 years of e-MTB development, combined with the expertise of Mondraker Factory Racing.

The Zendit is for riders who see the mountains as a constant challenge. Its dynamic handling, instinctive response to changing terrain, and ability to remain efficient when the gradient steepens or the terrain becomes unpredictable make it a powerful and precise e-MTB with character. With 165mm of rear travel, a standard mullet setup, and the latest evolution of the ZERO system, it's the highest-performing bike ever designed by Mondraker .

The next-generation Stealth Air Carbon frame was developed specifically around the Avinox system, without compromise. Mondraker is introducing 6-axis CNC machines for drilling and finishing the frame for the first time, replacing manual finishing processes. The Zendit also benefits from new, one-size-fits-all Enduro Max sealed bearings, combined with two additional rubber seals, to improve the durability and longevity of the components.

The ZERO suspension design has been completely revised to fully exploit the potential of the Avinox system. The result is a more active suspension, offering increased support and improved power transfer to the ground. Anti-squat is approximately 105%, progression reaches 27% with a 205 x 65 mm rear shock, and anti-rise is around 99%, preserving rear wheel traction under braking while minimizing the influence of braking on the suspension.

The Zendit adopts a mullet setup to maximize performance on challenging terrain, while also being configurable as a 29er thanks to a lower flip-chip that increases the chainstay length by 7mm without altering the kinematics, bottom bracket height, or key angles. Chainstay lengths are proportional across sizes to maintain consistent handling characteristics throughout the range.

Frame

Frame

Zendit Stealth Air full Carbon - Updated Zero Suspension System - 165mm Travel - Forward Geometry - Internal Battery - Boost 12 x 148mm Rear Axle - UDH - Tapered Head Tube - One-Piece Monoblock Upper Link - HHG Internal Cable Routing - MAX Capacity Sealed Bearings - Oversized 15mm Axles - Exclusive Plastic Motor Guards

Sizes

• S: 380 mm
• M: 410 mm
• ML: 435 mm
• L: 460 mm
• XL: 490 mm

Rear shock absorber

Fox Float X Factory Kashima Evol LV 205 x 65 mm - 2-position compression lever (Open/Firm) - Low-speed compression - Low-speed rebound - Air preload - Trunnion top mount - 30 x 8 mm bottom bushings

Shock absorber settings

CS 30 compression - 1.1 Bleed - RL50 rebound - Rezi B40 - LML - Standard MCU - 0 volume spacers

Fork

Fox Podium 29 Float GRIP X2 Factory Kashima - 170mm travel - Tapered steerer - Boost 20 x 110mm thru-axle - 44mm offset - High and low speed compression - High and low speed rebound - Air preload

Steering game

Acros custom ZS56 / ZS56 - 1-1/8" - 1.5" steering head tube - Internal cable routing - Sealing plugs - Without blocklock

Transmission

Cranks

e*thirteen Helix Race e*spec alloy - All sizes: 155 mm

Plateau

Sram XX Eagle 36-tooth T-Type - 104 BCD - Steel - CL55

Chain

Sram GX Eagle T-Type - 12 speed - PowerLock

rear derailleur

Sram X0 Eagle AXS T-Type - 12 speed

Gear lever

Sram Eagle AXS Pod Controller Rocker Paddle with discreet clamp - 12 speeds

Cassette

Sram XS 1275 - 10-52 teeth - T-Type - 12 speed

Derailleur hanger

Not included - UDH compatible

Brakes

Front brake

SRAM Maven Silver - 18mm 4-piston caliper - HS2 200mm IS 6-bolt monobloc rotor - Sintered metal pads on steel backing plates

Rear brake

SRAM Maven Silver - 18mm 4-piston caliper - HS2 200mm IS 6-bolt monobloc rotor - Sintered metal pads on steel backing plates

Brake lever

SRAM Maven Silver - SwingLink - Lever pivot bushings - Tool-free reach adjustment

Wheels

Rims

DT Swiss - Aluminium

Rays

DT Hybrid II Straightpull with DT ProLock Squorx ProHead aluminum nuts - 1:1 three-cross lacing

Front hub

DT Swiss 350 - 15 x 110 mm Boost - Disc IS 6 holes

Rear hub

DT Swiss 350 - 12 x 148 mm Boost - 6-bolt IS disc - SRAM XD Steel freehub body - 72T Ratchet DEG DF system

Front tire

Maxxis Assegai 29 x 2.5WT - Tubeless Ready - 3C Maxx Grip compound - EXO+ protection - 60 TPI - Soft bead

Rear tire

Maxxis Minion DHR II 27.5 x 2.5 WT - Tubeless Ready - 3C MaxxTerra compound - DD protection - 120 x 2 TPI - Soft bead

Components

Gallows

Onoff S9 30 mm 0º - Full CNC - Diameter 31.8 mm

Hanger

Onoff S9 1.0 Carbon - 25mm rise - 800mm width - 8º backsweep - 5º upsweep - 31.8mm diameter - Sizes L and XL: 38mm rise

Handles

Onoff Desert Pro - CNC lock-on - 135 mm - L and XL: thicker version

Seat post

Fox Transfer Factory Kashima internal - Adjustable travel - 31.6 mm diameter

• Size S: 95 to 120 mm
• Size M: 125 to 150 mm
• Size ML: 155 to 180 mm
• Size L: 155 to 180 mm
• Size XL: 185 to 210 mm

Saddle

Ergon SM10 E-Mountain Black

Weight

22.9 kg

Screen

Avinox DP100 Display / Avinox BC100 Wireless Controller (left and right)

Engine

Avinox Drive Unit

Battery

Avinox 800 Wh Battery / Avinox 4A Charger

Please note that the specifications may be changed without prior notice by the manufacturer, based on the availability of components and other factors.