Lazer Victor KinetiCore white silver matte: a helmet designed for triathlon

An aerodynamic triathlon helmet with KinetiCore technology

The Lazer Victor KinetiCore white silver matte triathlon helmet is designed to offer high aerodynamic performance while allowing greater freedom of head movement. Its shape combines a narrow front surface with a short rear section, retaining the benefits of a streamlined helmet without imposing the rigid position of a traditional long tail.

The Victor KinetiCore features a panoramic smoked lens held in place by magnets. This lens has an anti-scratch coating and an inward curvature to reduce drag. The Advanced TurnSys® adjustment system allows for precise fit adjustment using a dial, even while riding.

The helmet uses KinetiCore protection technology, Polygiene StayFresh™ treated foam, and cutouts designed to reduce pressure from eyeglass temples. It is available in two sizes and has a claimed weight of 340g in size M CE, without the lens.

Aerodynamic design

Developed for triathlon

The Lazer Victor KinetiCore is designed for triathletes and time trial specialists looking for an aerodynamic helmet compatible with natural head movements.

Narrow front surface

The front section adopts a reduced and narrow shape in order to limit the surface area directly exposed to the airflow.

Short back section

The helmet uses a shortened tail rather than a long rear profile.

Performance in different positions

This architecture aims to preserve aerodynamic efficiency when the cyclist moves their head or does not maintain a perfectly fixed position at all times.

Freedom of movement

Designed to fit the head

The short shape allows the cyclist to turn, raise or lower their head with less risk of misaligning a long aerodynamic tail.

Alternative to long-tailed helmets

The Victor KinetiCore seeks to offer the benefits of an aerodynamic helmet without the discomfort or potential performance losses associated with an incorrect position of an extended rear profile.

Large rear air outlet

A large opening at the rear complements the short shape and helps to expel hot air.

Aerodynamic development

Computer-aided design

The helmet's shape was developed using computer design tools.

Wind tunnel tests

The Victor KinetiCore was tested in a wind tunnel to evaluate and adjust its aerodynamic performance.

Validation in competition

Lazer indicates that the helmet has also been tested in racing conditions.

Drag reduction

The assembly formed by the hull, the short tail and the lens is designed to limit aerodynamic drag.

Smoked panoramic lens

Integrated screen

The helmet is equipped with a panoramic smoked lens that covers a wide field of vision.

Clear vision

The panoramic design aims to limit obstacles in the field of vision when the cyclist adopts an aerodynamic position.

Smoky tint

The lens receives a smoke tint adapted to the lighting conditions for which this type of screen is intended.

Lens treatment and shape

Scratch-resistant film

The outer surface of the lens receives a film designed to limit the appearance of scratches.

Inward curvature

The lens adopts an internal curvature designed to reduce aerodynamic drag.

Integration into the helmet profile

The shape of the screen follows the outer surface of the helmet to create a continuous transition with the airflow.

Magnetic attachment

Quick installation

The lens attaches to the helmet using magnets.

Simplified withdrawal

The system allows the screen to be quickly removed when conditions or the cyclist's preferences require it.

Manipulation without a complex mechanism

The magnets directly ensure the positioning of the lens on its fixing points.

Advanced TurnSys® System

Adjustment via dial

The helmet uses the Advanced TurnSys® system, controlled by an adjustment wheel.

Precise adjustment

Rotating the dial allows you to gradually fine-tune the fit around the head.

Adjustment while driving

The system is designed to be easily operated while the helmet is being worn.

Vertical adjustment

The Advanced TurnSys® system also allows the support position to be adjusted vertically according to the cyclist's morphology.

Glasses compatibility

Side recesses

The internal shape of the helmet incorporates recessed areas designed to accommodate the arms of glasses.

Pressure point reduction

These recesses limit the pressure exerted by the branches against the sides of the head.

Use with or without a lens

This design allows for the possibility of wearing compatible glasses when the panoramic lens is not in use.

Polygiene StayFresh™ Foams

Upholstery treatment

The internal foams receive a Polygiene StayFresh™ treatment.

Limiting bacterial odors

This treatment is designed to inhibit odors associated with bacterial growth.

Action continues

Lazer states that the treatment works continuously to keep the foams fresher and more hygienic.

Strategic positioning

The padding is distributed in order to preserve as much space as possible for air circulation.

Ventilation

Internal air circulation

The arrangement of the foams and openings allows air to circulate inside the helmet during exertion.

Rear evacuation

The large outlet located in the rear section helps to expel hot air.

High-intensity use

The ventilation system is designed for the sustained efforts encountered in triathlon and time trials.

Kinetic Core Protection

Integrated technology

KinetiCore is directly integrated into the EPS foam structure of the helmet.

Direct impacts

The technology is designed to absorb some of the energy produced during a direct impact.

Rotational impacts

It also aims to provide additional protection against rotational movements that may occur during a fall.

Deformable EPS blocks

EPS foam blocks are designed to deform under the effect of an impact.

Energy absorption

The deformation of these blocks allows them to absorb some of the energy that could otherwise be transmitted to the cyclist's head.

Reduction of reported items

Lazer states that this design limits the use of additional plastic parts and reduces the amount of EPS foam required.

Weight

340 g in size M CE

The stated weight is 340g for a size M helmet conforming to CE certification.

Weight indicated without lenses

This value is measured without the panoramic lens.

Available sizes

Size S

• Head circumference: 52 to 56 cm

Size M

• Head circumference: 55 to 59 cm

Size selection

Head circumference must be measured before selection. The two ranges partially overlap to allow for a choice based on head shape and fit preferences.

Technical specifications

General Information

• Product: Lazer Victor KinetiCore triathlon helmet
• Use: triathlon and time trial
• Advertised weight: 340 g in size M CE, without lens
• Number of sizes: 2

Aerodynamic design

• Frontal surface: small and narrow
• Back section: short
• Large rear air outlet
• Computer-aided design
• Wind tunnel tests
• Validation in competition
• Shape designed to follow head movements

Support system

• System: Advanced TurnSys®
• Adjustment: via dial
• Adjustment while driving: yes
• Vertical adjustment: yes

Sizes

• Size S: 52 to 56 cm
• Size M: 55 to 59 cm

Lens

• Type: panoramic
• Color: smoke
• Attachment: magnetic
• Exterior scratch-resistant film
• Inward curvature
• Removable lens: yes

Foams

• Treatment: Polygiene StayFresh™
• Limiting bacterial odors
• Positioning that promotes air circulation

Protection

• Technology: KinetiCore
• Managing direct impacts
• Rotational Impact Management
• Deformable EPS foam blocks
• Technology integrated into the structure

Glasses compatibility

• Cutouts for the temples of glasses
• Reduction of pressure on the sides of the head

Recommended use

• Triathlon
• Time trial
• High-speed individual efforts
• Course requiring frequent head movements
• Cyclists looking for a short, aerodynamic tail
• Use with smoked panoramic lens
• Use with compatible glasses when the lens is removed
• Competition
• Search for personal records

Why choose the Lazer Victor KinetiCore helmet?

• Aerodynamic helmet designed to follow the natural movements of the head
• Developed for triathlon and time trials
• Narrow front surface
• Short tail
• Large rear drain opening
• An alternative to long-tailed aerodynamic helmets
• Computer-aided design
• Wind tunnel tests
• Validation in competition
• Integrated smoke panoramic lens
• Exterior scratch-resistant film
• Internal curvature designed to reduce drag
• Magnetic lens attachment
• Quick screen installation and removal
• Advanced TurnSys® Adjustment System
• Vertical adjustment
• Adjustable while driving
• Hollows compatible with eyeglass temples
• Polygiene StayFresh™ treated foams
• Limiting bacterial odors
• Integrated KinetiCore Technology
• Management of direct and rotational impacts
• Deformable EPS foam blocks
• Advertised weight of 340 g in size M CE without lens
• Two sizes available