Bike cleaning kit

Bike7 Cleaning Kit

The Bike7 Cleaning Kit offers you everything you need to maintain your bike in the best conditions. Composed of products specially designed to clean and protect the different parts of your bike, this kit ensures complete and effective maintenance. With this kit, you can easily keep your bike in excellent condition, thus guaranteeing its proper functioning and appearance.

Kit Contents

• Wash & Finish 500ml
• Chain Clean 500ml
• Brake Cleaner 500ml
• Rasta Bike7
• Trigger Spray 1L

Chain Clean

Chain Clean is a powerful cleaner designed for chains and drivetrains. It is fast and effective, allowing you to clean the chain, derailleurs, chainrings and sprockets optimally.

Features

Whether you clean your chain after every ride or wait a little longer, Chain Clean offers a fast and effective solution. It applies directly to the chain, cassette, chainrings and derailleurs. In just seconds, it dissolves dirty lubricants and waxes, so you can simply rinse your drivetrain with water. It leaves your chain clean, ready for a fresh coat of oil or wax.

Chain Clean is also compatible with chain cleaner tanks, allowing you to collect the fluid for future reuse. It is safe for materials such as lacquers, carbon and synthetics. Once rinsed, it leaves no residue, allowing you to control the action time.

Instructions

• For chain cleaning: Spray Chain Clean on the chain, cassette, crankset and derailleur pulleys. Let sit for about 30 seconds, then wipe with a clean microfiber cloth or dry with compressed air.
• For a complete bike cleaning: Apply Chain Clean in the same way before you start washing the bike. Then rinse the drivetrain with water and continue with cleaning the rest of the bike. Afterwards, apply a new coat of oil or wax to the chain.

Technical information

• Form: liquid
• Color: transparent orange
• Odor: characteristic
• Viscosity (at +20°C): 1 mPa.s
• Relative density (at +20°C): 0.790 kg/L
• Self-ignition: +230°C
• Flash point: +73°C
• Water solubility: not soluble
• Vapor pressure (at +20°C): 800 Pa
• Boiling point: 173°C – 240°C

Brake Cleaner

Brake Cleaner is designed to effectively remove dirt, oil and dust from brake pads, discs and calipers. It leaves no residue, ensuring optimum braking power without the risk of squealing.

Features

Over time, pads and discs can accumulate dirt, which reduces braking performance. Brake Cleaner quickly dissolves this residue without leaving any residue. It evaporates quickly and does not harm piston seals or caliper paint. It is ideal for eliminating noise and restoring quiet and efficient braking.

Instructions

• To clean discs: Spray Brake Cleaner directly onto both sides of the disc. Leave for 2-3 seconds then wipe with a clean microfibre cloth.
• To clean the pads: Apply Brake Cleaner to the pads, leave for a few seconds and repeat. Wipe with a clean, dry microfiber cloth.
• For brake pistons: Remove the wheels and pads, spray Brake Cleaner on the pistons, then rub them with a clean cloth.

Technical information

• Form: liquid
• Flash point: <21°C
• Relative density (at 20°C): 0.72
• Water solubility: sparingly soluble
• Relative vapor density: >1
• Storage: 36 months, in a dry, cool place, protected from frost.

Wash & Finish

Wash & Finish is a concentrated bike shampoo that cleans, shines and protects in one go. Thanks to its natural wax-based formula, it leaves a shiny finish while protecting surfaces.

Features

Wash & Finish’s neutral pH makes it an ideal cleaner for washing and protecting your bike. It does not harm brake discs, ensuring their performance. In addition, the ultra-concentrated formula helps reduce plastic waste. A 500 ml bottle makes up to 5.5 litres of product to clean your road, mountain or e-bike.

Applications

• Suitable for road, mountain, urban and electric bikes.
• Ideal for cleaning handlebars, frames, forks, automatic pedals, wheels, etc.
• Removes dried dirt, sweat, sand and dust from various materials such as stainless steel, aluminum, titanium, rubber and carbon.

Instructions

• First clean the drivetrain with Chain Clean.
• Mix 100 ml of Wash & Finish with 1 litre of water in a spray bottle.
• Spray the mixture all over the bike, then rub with a Rasta glove for optimal cleaning.
• For extra shine, spray the mixture again and rinse with clean water. Dry the bike with a microfiber cloth.

Technical information

• Base: detergents and waxes
• Form: liquid
• Color: red
• Odor: characteristic
• Biodegradable: >85%
• Flammability: non-flammable
• pH value: +/- 6
• Storage: 36 months, in a dry, cool place, protected from frost.