Enve SES Disc PRO white: the carbon lenticular rear wheel designed for triathlon and time trials

An aerodynamic lenticular wheel, optimized for 28mm tires

The Enve SES Disc PRO white rear wheel is a carbon disc wheel designed for time trials and triathlons, with a clear objective: to offer maximum speed, excellent efficiency, and optimal stability in real race conditions. Modernized, lighter, and optimized for 28mm tires, it's aimed at athletes looking for a rear wheel without compromise.

Developed with ENVE athletes and already victorious in World Tour and Ironman events, the SES Disc PRO retains the aerodynamic heritage of previous SES Disc wheels while shedding 200 grams. Its 22mm internal width, tubeless compatibility without rim tape, and INNERDRIVE PRO rear hub make it a wheel designed for high-intensity time trials.

With a claimed weight of 1030g with valve, ENVE PRO ceramic bearings, Center Lock compatibility and aerodynamic optimization around 27 to 28mm tires, the SES Disc PRO is designed to ride fast, accelerate hard and maintain speed on courses where every watt counts.

Profile

Carbon lenticular wheel for speed

The ENVE SES Disc PRO is a carbon disc rear wheel designed to maximize speed in triathlon and time trials. It is aimed at fast courses, sustained efforts, and situations where aerodynamics plays a crucial role.

Modernized and streamlined version

This new generation of SES Disc PRO reduces the weight by 200 grams compared to previous versions, while improving performance and stability thanks to a wider rim and a reworked shape.

Performance validated in the race

Developed with ENVE athletes, the SES Disc PRO has already been used successfully in World Tour and Ironman events. It is designed to meet the demands of the highest level in time trials and triathlons.

Aerodynamics

Optimized for 28mm tires

The ENVE SES Disc PRO has been aerodynamically optimized around 28mm tires. This modern section improves performance, comfort, and aerodynamic efficiency in real-world conditions.

Real-World Fast Performance

ENVE designed the SES Disc PRO to perform at the most critical wind angles encountered in time trials and triathlons. The goal is to offer a fast wheel in the real world, not just in theoretical conditions.

Aerodynamic improvement compared to the previous generation

Thanks to a wider rim and optimization for modern tires, the SES Disc PRO offers an aerodynamic advantage of approximately 0.69 watts compared to the old ENVE lenticular rear wheel.

Ideal pairing with the SES 100 PRO

The SES Disc PRO is designed to be paired with the ENVE SES 100 PRO front wheel. Together, they form a highly aerodynamic setup, designed to maximize speed while maintaining control and stability.

Construction

Lenticular structure with internal rays stuck together

The SES Disc PRO uses a lenticular construction with bonded internal spokes. This design combines stiffness, aerodynamic efficiency, and low weight, while maintaining excellent acceleration.

INNERDRIVE PRO rear hub

The heart of the wheel lies in the ENVE INNERDRIVE PRO hub internals. This technology provides efficient engagement, low friction, and a lightweight design suited to the demands of time trials and triathlons.

40-tooth ratchet and low-friction spring

PRO internals benefit from a kit developed for ENVE professional teams, with a light action ratchet spring to reduce drag and a 40-tooth system for efficient engagement.

ENVE PRO ceramic bearings

ENVE PRO ceramic bearings utilize hardened stainless steel raceways, ceramic balls and optimized seals to minimize friction while effectively protecting against impurities.

Tires and tubeless

Tubeless compatible only

The ENVE SES Disc PRO is compatible only with tubeless tires. This design allows you to take full advantage of tubeless technology in terms of performance, comfort, and puncture resistance.

Tubeless ready without rim tape

The wheel is tubeless ready without requiring tubeless rim tape. This simplifies assembly, reduces the number of additional components, and contributes to the overall efficiency of the wheel.

Recommended width: 27 to 28 mm

The SES Disc PRO is optimized for 27-28 mm tires, with a minimum width of 25 mm. This range allows for the best balance between aerodynamics, performance, and comfort.

Maximum pressure

The maximum pressure indicated is 100 PSI, or 6.8 bar, or the maximum pressure recommended by the tire manufacturer if lower.

Braking and standards

Center Lock Braking

The ENVE SES Disc PRO rear wheel is compatible with Center Lock brake rotors. This modern standard ensures a clean, reliable, and suitable mounting for triathlon and time trial bikes with disc brakes.

12x142 mm rear axle

The rear hub adopts a 12x142 mm axle spacing, compatible with modern road, triathlon and time trial frames equipped with disc brakes.

Manufacturing

Made in Ogden, Utah

Like ENVE's premium wheels, the SES Disc PRO is manufactured in Ogden, Utah, USA. ENVE brings together design, research and development, testing, manufacturing, assembly, and customer support under one roof.

ENVE Quality Control

This integrated manufacturing allows ENVE to control every stage of development and production, in order to guarantee a high level of performance, reliability and finish.

Technical specifications

Rim

• Model: ENVE SES Disc PRO
• Type: Carbon lenticular rear wheel
• Internal width: 22 mm
• Hook: 0.5 mm
• Tire compatibility: tubeless only
• Tubeless: ready without rim tape
• Tubeless valve length: 35 mm
• Recommended tire width: 27 to 28 mm
• Minimum tire width: 25 mm
• Maximum pressure: 100 PSI / 6.8 bar

Hub and construction

• Construction: internal spokes glued together
• Hub transmission: INNERDRIVE PRO
• Bearings: ENVE PRO Ceramic Bearings
• Center distance: 12x142 mm

Braking

• Brake type: disc
• Disc mounting: Center Lock

Weight

• Weight of complete wheel: 1030 g with valve

Recommended use

• Triathlon
• Time trial
• Fast and rolling courses
• Timed events
• Triathlon bikes with disc brakes
• Time trial bikes with disc brakes
• Cyclists looking for a fast, lightweight, and high-performance lenticular rear wheel

Why choose the ENVE SES Disc PRO rear wheel?

• Carbon lenticular rear wheel designed for pure speed
• Optimized for time trials and triathlons
• 200g lighter than the previous generation
• Advertised weight of 1030 g with valve
• Internal width of 22 mm
• Optimized for 28mm tires
• Tubeless compatible only
• Tubeless ready without rim tape
• ENVE INNERDRIVE PRO internal hubs
• ENVE PRO ceramic bearings
• Center Lock Braking
• Rear bolt pattern 12x142 mm
• Construction with bonded internal spokes
• Already victorious in World Tour and Ironman events
• Ideal match with the ENVE SES 100 PRO front wheel
• Premium ENVE manufacturing in Ogden, Utah, USA