Fox Transfer Neo Telescopic Rod Control

Fox Transfer Neo 1X - 2025 Dropper Post Control

The Fox Transfer Neo 1X Wireless Seatpost Control Lever is designed to provide precise, wireless height control of the Fox Transfer Neo 2025 seatpost. This control enhances the riding experience by allowing for simple and effective adjustments.

• Wireless Control : Allows for seat post height adjustment without wiring, simplifying installation and use.
• Ergonomic Design : Designed for comfortable grip and easy access to adjustment functions.
• Wireless Module : Includes a small wireless pod integrated into the brake collar to optimize communication with the suspension system.
• Bi-Directional Controller : Equipped with a bi-directional knob for precise adjustments of shock threshold and seat post height.

Installation and configuration

The control lever requires a CR2032 button cell battery, installed behind the cover on the lower part of the lever. The battery life is approximately 8 months. A pairing button and a multi-color LED allow you to check the battery level and configure the control module.

Hanger Installation (22.2mm Clamp)

1. Attach the lever collar to the handlebar at the desired location. Check that there is enough space for the other components.
2. Insert the 35mm clamp screw through the lever and clamp. Tighten with a 3mm hex key to 2.0 N•m. For carbon handlebars, follow the manufacturer's recommendations.

Installation with Interface Matchmaker

1. Install the brake lever according to the manufacturer's instructions.
2. Attach the remote control lever to the brake lever collar using the supplied adapter and 22mm mounting screw. Tighten to 2.0 N•m.

Installation with I-Spec EV

1. Install the brake lever following the manufacturer's instructions.
2. Attach the remote control lever with the adapter and 22 mm screw to the brake lever clamp. Tighten the screws to 2.0 N•m.

Coupling with the control module

1. Make sure the module battery is charged and installed.
2. Press the pairing button on the control lever to activate the flashing green LED.
3. Also press the pairing button on the control module to make the green LED on it flash.
4. When the LEDs turn solid, press the pairing button again to confirm pairing.

Transfer Neo System

The Transfer Neo system includes a control module (not included with the shifter) mounted near the seatpost clamp, with a rechargeable LiPo battery. This module uses a “shake to activate” system, requiring no on/off button. Parked mode and Commuter mode are activated via the Ride FOX Bike app to preserve battery life.

For optimal use, it is recommended to follow the installation and setup instructions provided. The Fox Factory Wireless Control Lever offers a convenient and efficient solution for seatpost and suspension system adjustments.