Fox Digital 350 PSI Max: a precise high-pressure pump for suspensions

A high-pressure digital pump for adjusting forks and shock absorbers

The Fox 350 PSI Max digital high-pressure pump is designed to control and adjust the air pressure of suspension forks and air shocks. Its maximum pressure of 350 PSI covers the inflation needs of compatible shocks, while its LCD screen allows you to view the pressure directly during adjustment.

It uses a stainless steel UP-SA swivel head to facilitate access to hard-to-reach valves. This design is especially useful when suspension linkages or certain frame components prevent the use of a traditional pump head.

The body and handle are made of 6063 aluminum. A purge button allows the pressure to be gradually lowered by adjustments of approximately 2 to 3 PSI, while the collapsible hose facilitates storage and transport of the pump.

Digital display

LCD screen

The FOX Digital Shock Pump features an LCD screen that displays the pressure measured during inflation and suspension adjustment.

Direct pressure reading

The digital display makes it easy to check the value reached before using the purge button to fine-tune the setting.

Air suspension adjustment

The screen accompanies the different stages of pressurizing compatible air forks and shock absorbers.

Maximum pressure

Up to 350 PSI

The pump allows a maximum pressure of 350 PSI to be reached.

Range suitable for shock absorbers

This capacity is advertised as sufficient to cover the needs of all compatible air shock absorbers.

Use with air forks

The pump can also be used to adjust the pressure of compatible air suspension forks.

Swivel pump head

UP-SA System

The UP-SA head can pivot to facilitate its positioning on the suspension valve.

Stainless steel construction

The pump head is made of stainless steel to withstand repeated handling.

Access to valves is difficult

Its articulation makes it easier to reach valves located behind connecting rods or near frame components.

An alternative to a traditional head

The pivoting head is designed to fit into configurations where a fixed or conventional pump head would lack space.

Precise pressure adjustment

Purge button

The pump includes a button to release a small amount of air after inflation.

Adjustment of 2 to 3 PSI

Each use of the purge system allows for an adjustment of approximately 2 to 3 PSI.

Gradual refinement

This function allows the desired value to be reached gradually after slightly exceeding the target pressure.

Control via LCD screen

The pressure variation can be monitored directly on the digital display while using the purge button.

Aluminum construction

6063 aluminum body

The pump cylinder is made of 6063 aluminum.

6063 aluminum handle

The handle also uses 6063 aluminum to form a homogeneous assembly.

Designed for regular use

The materials selected are suitable for repeated operations of checking and adjusting air suspensions.

Flexible and foldable

Reducing bulk

The hose can be folded against the pump body when not in use.

Easy storage

This configuration simplifies storage in a toolbox, workshop bag, or transport equipment.

Head positioning

The flexible hose also allows the swivel head to be oriented without requiring direct alignment between the pump and the valve.

Use

Adjusting the air shock absorbers

The FOX Digital Shock Pump allows you to inflate and adjust air shocks up to 350 PSI.

Suspension fork adjustment

It is also suitable for compatible air forks requiring precise pressure control.

Pre-trip check

The LCD display allows you to check the pressure before riding and adjust it to the desired setting.

Workshop maintenance

The pump can be used during maintenance or repressurization operations of an air suspension.

Technical specifications

Identification

• Product: FOX Digital Shock Pump
• Reference: 027-00-020
• Application: suspension forks and air shock absorbers

Display

• Display type: LCD screen
• Digital pressure reading: yes

Pressure

• Maximum pressure: 350 PSI
• Purge button: yes
• Adjustment by purging: approximately 2 to 3 PSI

Construction

• Body material: 6063 aluminum
• Handle material: 6063 aluminum
• Head material: stainless steel
• Head type: UP-SA swivel

Flexible

• Flexible and foldable: yes

Recommended use

• Adjusting air suspension forks
• Adjusting the air shock absorbers
• Digital pressure control
• Adjustment before an outing
• Workshop maintenance
• Suspensions requiring high pressure
• Bicycles with difficult-to-access suspension valves
• Users seeking gradual pressure adjustment

Why choose the FOX Digital Shock Pump?

• Maximum pressure of 350 PSI
• LCD screen for direct pressure reading
• Compatible with the adjustment requirements of air shock absorbers
• Compatible with air suspension forks
• UP-SA Swivel Head
• Head made of stainless steel
• Easy access to the valves located behind the connecting rods
• 6063 aluminum body
• 6063 aluminum handle
• Purge button to adjust the pressure
• Micro-adjustment of approximately 2 to 3 PSI
• Flexible and foldable
• Size suitable for storage and transport
• FOX Reference 027-00-020