Rudy Project Nytron Bahrain Victorious: an aerodynamic helmet in the team's colors

An aerodynamic road helmet for performance and triathlon

The Rudy Project Nytron Team Bahrain Victorious road helmet is an aerodynamic helmet developed for fast road cycling and triathlon. Designed with the specialists at Swiss Side, it aims to reduce drag while maintaining ventilation suitable for sustained efforts.

Its co-molded construction combines an outer shell with a dual-density EPS core featuring an internal structure that promotes airflow. Fifteen vents and internal channels organize airflow through the helmet, while the RSR 10M retention system ensures a secure fit around the entire circumference of the head.

This version features the official Team Bahrain Victorious design and comes in two sizes: S/M for a head circumference of 55 to 58 cm and L for a head circumference of 59 to 61 cm. It has a Fastex closure, Divider Pro side buckles and interchangeable comfort pads.

Aerodynamic design

Developed with Swiss Side

The Rudy Project Nytron was designed with the participation of aerodynamics experts from Swiss Side.

Aero Road Profile

The hull adopts a shape oriented towards reducing air resistance during fast phases, sustained relays and efforts in an aerodynamic position.

Road and triathlon

Its positioning makes it ideal for road cycling and triathlon, two disciplines in which airflow management plays an important role.

Official helmet of Team Bahrain Victorious

Professional use

The Nytron is presented as the official racing helmet of Team Bahrain and as a model chosen by professional road cyclists.

Team design

This version features a finish associated with Team Bahrain Victorious, with blue, green and Lilac/Blue Avio Metal Shiny shades according to the information provided.

Co-molded construction

Co-molded EPS technology

The construction relies on a co-molding technology that allows the external shell and internal EPS structure to be combined.

Dual-density EPS core

The helmet uses a dual-density EPS core integrated with an internal structure designed to improve airflow.

Integrated construction

This architecture combines the shell and the protective foam in a structure designed to meet the quality, weight and homologation requirements announced by Rudy Project.

Ventilation

15 vents

The Nytron has 15 ventilation openings distributed across the hull.

Flow Through Ventilation

Flow Through Ventilation technology organizes the entry of air at the front and its passage through the internal channels of the helmet.

Hot air exhaust

The rear vents allow hot air to escape from the helmet during exertion.

Controlled ventilation

The arrangement of the vents aims to maintain air circulation while preserving the aerodynamic shape of the hull.

RSR 10 M restraint system

Occipital adjustment

The RSR 10 M system allows adjustment of the support at the back of the skull.

360° Comfort Fit

The 360° Comfort Fit technology uses a retention ring surrounding the entire circumference of the head.

Tightening distribution

This design aims to distribute support around the head rather than concentrating pressure on a limited area.

Precise adjustment

The tightening level can be adjusted to adapt the helmet to the morphology and preferences of the cyclist.

Fastex locking system

Push-button buckle

The Fastex closure uses a classic push-button buckle.

Quick opening and closing

The system is designed to allow the chin strap to be attached and detached quickly.

Simple handling

The loop can be used to secure the helmet under the chin before departure.

Divider Pro Side Loops

Strap positioning

The Divider Pro side loops allow you to organize the passage of the straps around the ears.

Adjusting the support

Their positioning contributes to the balance of the helmet and the adjustment of the chin strap.

Interchangeable foam pads

Free Pads Interchangeable Comfort Padding

The internal foams can be replaced in order to renew the contact areas or to adapt the padding.

Helmet maintenance

The ability to remove the foams makes them easier to clean or replace when worn.

Protection against rotational impacts

RP Rotational Impact Test

The helmet is associated with the Rudy Project's RP Rotational Impact Test protocol.

Evaluation of rotational movements

This test concerns the evaluation of the helmet's behavior during impacts likely to generate rotational movements.

Safety information

The data provided does not detail the operation of a specific mechanical device. Therefore, this characteristic should be presented as a test protocol announced by the Rudy Project.

Approvals

European standard

The Nytron is advertised as conforming to the CE/EN 1078 standard.

American standard

It also meets CPSC 12.03 approval according to the information provided.

Available sizes

Size S/M

• Head circumference: 55 to 58 cm
• Advertised weight for this version: 270 g

Size L

• Head circumference: 59 to 61 cm
• Advertised weight for this version: 310 g

Size selection

The head circumference must be measured before selection. The measurement is taken horizontally around the skull, above the eyebrows and ears.

Weight

General value announced

An initial manufacturer's data mentions a weight of 250g without specifying the size or configuration concerned.

Detailed values by size

The specifications for each variation indicate 270 g in size S/M and 310 g in size L.

Conflicting data

This information is not exactly accurate. For this product sheet, the detailed values of 270 g and 310 g should be used to distinguish the two sizes, while the general value of 250 g should be considered an indicative figure to be verified according to the generation, finish, or measurement protocol.

Colors

Team Bahrain Victorious finish

The helmet is associated with a blue and green color combination, with a detailed designation Nytron Lilac/Blue Avio Metal Shiny in the provided specifications.

Glossy appearance

The Metal Shiny designation indicates a glossy, metallic-effect finish on certain areas of the helmet.

Technical specifications

General Information

• Product: Rudy Project Nytron Team Bahrain Victorious road helmet
• Family: Helmets
• Disciplines: road and triathlon
• Fit: men and women
• Construction: EPS co-molding
• Core: Dual-density EPS
• Number of vents: 15

Support system

• Occipital system: RSR 10 M
• Technology: 360° Comfort Fit
• Circular adjustment: yes
• Side loops: Divider Pro
• Closure: Fastex

Protection and approvals

• Announced system or protocol: RP Rotational Impact Test
• European approval: CE/EN 1078
• US certification: CPSC 12.03

Foams

• Interchangeable comfort foams
• Technology: Free Pads Interchangeable Comfort Padding
• Replaceable foams: yes

Sizes and weights

• Size S/M: 55 to 58 cm
• Advertised weight in size S/M: 270 g
• Size L: 59 to 61 cm
• Advertised weight in size L: 310 g
• Other general weight reported: 250 g, size not specified

Colors

• Team: Bahrain Victorious
• General colors indicated: blue and green
• Detailed description: Lilac/Blue Avio Metal Shiny

Recommended use

• Road cycling
• Triathlon
• Competition
• Quick workouts
• High-intensity outings
• Rolling terrain
• Sprints and fast relays
• Cyclists looking for an aerodynamically profiled helmet
• Users wanting a circular occipital adjustment
• Supporters of Team Bahrain Victorious

Why choose the Rudy Project Nytron Team Bahrain Victorious helmet?

• Aero Road helmet developed with Swiss Side
• Official model associated with Team Bahrain Victorious
• Road and triathlon use
• Co-molded construction with dual-density EPS core
• Internal structure promoting air circulation
• 15 vents
• Flow Through Ventilation Technology
• RSR 10 M Retention System
• 360° Comfort Fit
• Fastex quick release
• Divider Pro Side Loops
• Interchangeable comfort foams
• Rotational Impact Test protocol announced
• CE/EN 1078 and CPSC 12.03 approvals
• Two sizes available
• Team Bahrain Victorious finish