Enve SES 100 PRO + SES Disc PRO white: the aerodynamic carbon bike setup for triathlon and time trials

A 100mm front and lenticular rear wheel assembly, optimized for 28mm tires

The Enve SES 100 PRO + SES Disc PRO white wheelset is a very high-end carbon build designed for triathlon, time trials, and the pursuit of maximum speed. It combines a 100mm SES 100 PRO front wheel with a disc-shaped SES Disc PRO rear wheel to create a radically aerodynamic, fast combination designed for timed events.

Developed with ENVE athletes and already proven in World Tour and Ironman victories, these wheels are optimized for 28mm tires to offer the best balance of aerodynamics, efficiency, stability, and performance in real-world conditions. The SES 100 PRO provides aerodynamic penetration and control at the front, while the SES Disc PRO maximizes speed and stiffness at the rear.

With an internal width of 22mm, tubeless compatibility, ENVE INNERDRIVE PRO hubs, ENVE PRO ceramic bearings and premium manufacturing in Ogden, Utah, this pair of SES PRO wheels is for athletes who want a no-compromise build to ride fast, maintain speed and save time on suitable courses.

Concept

A pair designed for pure speed

The ENVE SES 100 PRO + SES Disc PRO combination was designed for disciplines where aerodynamics are crucial: triathlon, time trials, and timed events. Each wheel plays a specific role in optimizing the bike's overall speed.

SES 100 PRO 100mm front wheel

The ENVE SES 100 PRO front wheel features a very deep 100mm profile. It is designed to provide maximum aerodynamic advantage while maintaining reassuring stability at high speeds.

SES Disc PRO lenticular rear wheel

The ENVE SES Disc PRO rear wheel is a modernized, lighter, and optimized carbon lenticular wheel designed for 28mm tires. It is engineered to maximize speed, improve efficiency, and provide excellent stiffness during acceleration.

Aerodynamics

Optimized for 28mm tires

The ENVE SES 100 PRO and SES Disc PRO wheels are optimized around 28mm tires. This modern width improves aerodynamics, efficiency, comfort, and grip in real-world conditions.

Real-World Fast Performance

ENVE develops its SES wheels to perform in real-world conditions, with wind angles encountered on the road, in triathlons, and in time trials. The goal is not just to be fast in the wind tunnel, but to offer a measurable advantage on the road.

Stability and control

The SES 100 PRO is designed to offer stable handling despite its 100mm profile, while the SES Disc PRO provides stiffness and efficiency at the rear. Together, they allow you to maintain speed through corners, accelerations, and fast sections.

Gain compared to the previous generation

The SES Disc PRO has been aerodynamically redesigned for modern tires. Thanks to a wider rim and an optimized shape, it offers an advantage of approximately 0.69 watts compared to the old ENVE disc rear wheel.

ENVE SES 100 PRO front wheel

100mm carbon profile

The SES 100 PRO front wheel is a true speed weapon. Its 100mm profile was developed for fast courses, constant effort, and events where drag reduction is a priority.

ENVE INNERDRIVE PRO Hub

The front wheel is equipped with an ENVE INNERDRIVE PRO hub, paired with ENVE PRO ceramic bearings. This setup aims to offer smoothness, efficiency, and reliability in a high-end configuration.

Aerodynamic shelving

The SES 100 PRO uses Alpina Ultralite Silver Aero R5 Straight Pull TCX Oval-Head spokes, paired with Alpina Nylock Brass nipples. This build contributes to the wheel's aerodynamic efficiency and reliability.

Weight of 815 g

The SES 100 PRO front wheel has a claimed total weight of 815g including valve and rim tape. The rim alone is claimed to weigh 590g.

ENVE SES Disc PRO rear wheel

Modernized carbon lenticular wheel

The SES Disc PRO is a carbon disc rear wheel designed to offer the highest level of performance in triathlon and time trials. It builds upon the legacy of previous SES Disc models, with a lighter and faster design.

200g lighter than the previous generation

ENVE has reduced the weight of the SES Disc PRO by 200g compared to the previous generation, while maintaining the stiffness needed for powerful efforts, restarts and accelerations out of the saddle.

INNERDRIVE PRO hub internals

The rear wheel uses ENVE INNERDRIVE PRO hub internals, with a light action ratchet spring to reduce friction and a 40-tooth ratchet for efficient engagement.

ENVE PRO ceramic bearings

ENVE PRO ceramic bearings are designed to minimize friction while maintaining high reliability. They utilize hardened stainless steel raceways, ceramic balls, and optimized seals.

Weight of 1030 g

The SES Disc PRO rear wheel has a claimed weight of 1030g with valve. It is tubeless ready without rim tape, which simplifies assembly and reduces the number of additional components.

Tires and tubeless

Tubeless compatibility only

The ENVE SES 100 PRO and SES Disc PRO wheels are compatible only with tubeless tires. This choice allows you to benefit from the advantages of tubeless tires in terms of performance, comfort, pressure, and puncture resistance.

Recommended tires: 27 to 28 mm

Both wheels are optimized for 27-28 mm tires. The minimum recommended width is 25 mm, allowing for flexible tire fitting while maintaining a clear performance focus.

Maximum pressure

The maximum pressure indicated is 100 PSI, or 6.8 bar, or the maximum pressure recommended by the tire manufacturer if lower.

Braking and standards

Center Lock Braking

The ENVE SES 100 PRO + SES Disc PRO wheelset is compatible with Center Lock brake rotors. This modern standard ensures a clean, reliable, and suitable mounting for triathlon and time trial bikes with disc brakes.

Modern through axes

The front wheel uses a 12x100 mm axle spacing, while the rear wheel uses a 12x142 mm axle spacing. These standards correspond to modern frames equipped with disc brakes.

Manufacturing

Made in Ogden, Utah

Like ENVE's premium wheels, the SES 100 PRO and SES Disc PRO are manufactured in Ogden, Utah, USA. ENVE brings together design, research and development, testing, manufacturing, assembly, and customer support under one roof.

ENVE Quality Control

This integrated manufacturing allows ENVE to control every stage of development and production, in order to guarantee a high level of performance, reliability and finish.

ENVE Limited Lifetime Warranty

ENVE wheels are covered by the ENVE Limited Lifetime Warranty, subject to the brand's eligibility requirements. Covered products may be repaired or replaced at ENVE's discretion. Product registration is recommended to facilitate warranty service.

Technical specifications

ENVE SES 100 PRO front wheel

• Type: Carbon front wheel
• Rim height: 100 mm
• Internal width: 22 mm
• Hub: ENVE INNERDRIVE PRO
• Bearings: ENVE PRO Ceramic Bearings
• Center distance: 12x100 mm
• Spokes: Alpina Ultralite Silver Aero R5 Straight Pull TCX Oval-Head
• Spoke length: 226 mm non-drive side / 228 mm drive side
• spoke tension: 120 kgf
• Nuts: Alpina Nylock Brass
• Braking: Center Lock
• Rim weight: 590 g
• Complete wheel weight: 815 g including rim tape and valve

ENVE SES Disc PRO rear wheel

• Type: Carbon lenticular rear wheel
• Internal width: 22 mm
• Hook: 0.5 mm
• Construction: internal spokes glued together
• Hub transmission: INNERDRIVE PRO
• Bearings: ENVE PRO Ceramic Bearings
• Center distance: 12x142 mm
• Tubeless: ready without rim tape
• Tubeless valve length: 35 mm
• Braking: Center Lock
• Weight of complete wheel: 1030 g with valve

Tire compatibility

• Tire compatibility: tubeless only
• Recommended tire width: 27 to 28 mm
• Minimum tire width: 25 mm
• Internal width: 22 mm
• Maximum pressure: 100 PSI / 6.8 bar

Weight of the pair

• Front wheel weight: 815 g with rim tape and valve
• Rear wheel weight: 1030 g with valve
• Total weight (stated): 1845 g

Recommended use

• Triathlon
• Time trial
• Timed events
• Fast and rolling courses
• Triathlon bikes with disc brakes
• Time trial bikes with disc brakes
• Athletes looking for a highly aerodynamic, no-compromise wheelset

Why choose the ENVE SES 100 PRO + SES Disc PRO pair?

• Ultimate aerodynamic suit for triathlon and time trial
• SES 100 PRO carbon 100mm front wheel
• SES Disc PRO carbon lenticular rear wheel
• Aerodynamic optimization around the 28 mm tires
• 22 mm internal width on both wheels
• ENVE INNERDRIVE PRO hubs and internals
• ENVE PRO ceramic bearings
• Tubeless compatibility only
• SES Disc PRO tubeless ready without rim tape
• Center Lock Braking
• 12x100 mm front bolt pattern and 12x142 mm rear bolt pattern
• Total advertised weight of 1845 g
• SES Disc PRO is 200g lighter than the previous generation
• Already proven in World Tour and Ironman events
• Premium ENVE manufacturing in Ogden, Utah, USA
• Assembly designed to maximize speed, stability and efficiency