Contact us for a personalized quote [email protected]
EU companies: VAT-free purchase available [email protected]
Need advice before your purchase? [email protected]
The ZIPP 303 XPLR S B1 wheelset - white is designed for gravel cyclists who want access to Zipp 's major innovations in a fast, robust, and high-performance carbon wheel, without aiming for the highest price point in the range. It incorporates the key principles of the brand's extra-wide premium gravel wheels, with a construction designed for long days, speed, and reliability.
With their 54mm deep hookless carbon rim and massive 32mm internal width, the Zipp 303 XPLR S B1 wheels are optimized for 40-61mm tubeless-ready gravel tires. This width allows for significantly increased air volume, lower tire pressure, and reduced vibrations from rough surfaces.
In gravel riding, losses due to shocks, vibrations, rolling resistance, and aerodynamics can significantly slow a cyclist down. To address these challenges, Zipp applies its Total System Efficiency philosophy, with a wheel designed as a complete system: wide rim, compatible wide tire, low pressure, grip, traction, and aerodynamic efficiency.
Hookless carbon rim.
700c.
54 mm.
32 mm.
40 mm.
Symmetrical.
UD fiber with adhesive decorations.
The Zipp 303 XPLR S B1 is designed to reduce the performance losses inherent in gravel riding: rolling resistance, ground vibrations, aerodynamic drag and fatigue over long distances.
The ultra-wide 32mm internal profile increases the available air volume in the tire, allowing riding at pressures below 30 psi / 2.1 bar depending on the tire used and fitting recommendations.
Running at lower pressure allows for better vibration filtering, improved cornering grip, and better traction uphill.
The wide and deep rim integrates seamlessly with compatible gravel tires, in order to improve aerodynamic efficiency on fast sections.
Zipp 76D.
Zipp 176D.
Stainless steel cartridge bearings.
Disc Center Lock.
Supplied with front and rear end caps for 12 mm thru-axles.
Compatible only with approved Tubeless Ready tires from 40 to 61 mm, with sealant or inner tube.
The Zipp 303 XPLR S B1 is only compatible with approved tires. This is essential to ensure safety, performance, and proper functioning of the wheel/tire system.
The Goodyear XPLR Slick and Goodyear XPLR Inter tires are specifically designed and optimized for the Zipp 303 XPLR S B1.
50 psi / 3.45 bar.
Disc brake.
Center Lock.
1610 g.
Estimated weight for the lightest configuration: 12mm thru axles and XDR body. Rim tape and valve included in the weight.
135 kg.
Zipp wheels come with a lifetime warranty against product defects that occur during use. This warranty is non-transferable and requires proof of purchase.
Data sheet
Product condition