Enve G SES 6.7 PRO silver - 100-3325-025 + 100-3325-027/028/029/030/031

Enve G SES 6.7 PRO silver wheels - 100-3325-025 + 100-3325-027/028/029/030/031 - 2026

The Enve G SES 6.7 PRO silver 2026 wheelset is designed to be one of the fastest gravel solutions on the market. Developed without compromise around tires of 44 mm and wider, it has a clear objective: to maximize aerodynamics, rolling efficiency, and speed on fast gravel courses.

With a massive 35mm internal width, a 60mm front rim, and a 67mm rear rim, the G SES 6.7 PRO transforms every watt into speed. This deep and wide architecture is designed for fast races, exposed sections, rolling trails, and courses where aerodynamic performance is crucial.

Used by gravel world champion Florian Vermeersch, the G SES 6.7 PRO wheels are developed and tested with top athletes to bring road-level aerodynamic performance to modern gravel riding. With a claimed weight of 1580g per pair, including rim tape and valves in the HG freehub configuration, they offer a rare combination of pure speed, stability, and efficiency.

General design

Use

Gravel racing, high-speed gravel, competition and fast courses.

Format

700c.

Internal width

35 mm.

Forward Depth

60 mm.

Rear depth

67 mm.

Weight of the pair

1580 g, rim tape and valves included, HG body configuration.

Rims

Front rim

Carbon, depth 60 mm, ERD 532 mm +/- 1 mm, weight 505 g.

rear rim

Carbon, depth 67 mm, ERD 517 mm +/- 1 mm, weight 500 g.

Wall width

3.8 mm.

Number of holes

24 holes.

Technology

Wide Hookless Bead.

Gravel performance

Maximum aero

The G SES 6.7 PRO prioritizes maximum aerodynamic performance with modern gravel tires of 44 mm and above.

Maximum rolling efficiency

The 35mm internal width allows for efficient use of high-volume tires to improve rolling efficiency, comfort, and stability on fast terrain.

Maximum speed

The deep 60mm front / 67mm rear profile is designed for courses where speed is paramount, including fast tracks, exposed sections and long race sections.

Real-World Fast Goes Off Road

The G SES range adapts aerodynamics to the realities of modern gravel riding: higher speeds, wider tires, the need for comfort, road holding and protection against hidden impacts in the paths.

Wide Hookless Bead Technology

Pinch protection

Wide Hookless Bead technology creates a wider, more rounded rim that better dissipates impact energy, reducing the risk of pinch flats.

Impact resistance

The G SES range uses ENVE's experience from the M Series mountain bike wheels to offer high impact resistance relative to weight.

Aerodynamics with modern tires

The rim width is adapted to modern gravel tires to maintain clean airflow between the tire and the rim, even with large volumes.

ENVE Innerdrive PRO Hubs

Hub system

ENVE Innerdrive PRO with ultralight hub body, 40-tooth PRO ratchet, low-friction spring and ENVE PRO Ceramic Bearings.

Weight of the hub set

281 g total: 87 g at the front and 194 g at the rear.

Weight gain

Weight saving of 60g compared to the Premium INNERDRIVE system.

Key Technologies

• Ultralight hub body
• Ratchet PRO ultralight 40 teeth
• PRO spring optimized to reduce friction
• ENVE PRO Ceramic Bearings
• Aligning the spokes to reduce their twisting
• INNERDRIVE technology derived from Premium Straight-Pull hubs

Shelving

Rays

Silver Alpina Ultralite.

Number of holes

24 holes in the front and back.

Braking

Brake type

Disc brake.

Disk interface

Centerlock.

Disk information

Centerlock locking ring not included.

Tubeless

Tubeless tape width

39 mm.

Front valve length

80 mm.

Rear valve length

85 mm.

Tire compatibility

Minimum section

44 mm.

Recommended sections

44 to 52 mm.

Maximum pressure

50 psi / 3.4 bar.

Manufacturing

Made in the USA

Like ENVE premium wheels, G SES rims are manufactured in Ogden, Utah, USA.

Integrated Development

Design, R&D, testing, manufacturing, assembly and customer support are all brought together under one roof to ensure the level of performance and quality expected on ENVE premium products.

Weight

Front wheel weight

735 g.

Rear wheel weight

845 g.

Weight of the pair

1580 g, rim tape and valves included, HG body configuration.

Recommended use

• Gravel race
• High-speed gravel
• Speed course competition
• Rolling and exposed trails
• Long, high-speed sections
• Cyclists seeking maximum gravel aerodynamics

Technical specifications

• Brand: ENVE
• Model: G SES 6.7 PRO 2026
• Size: 700c
• Material: carbon
• Internal width: 35 mm
• Front depth: 60 mm
• Rear depth: 67 mm
• Front ERD: 532 mm +/- 1 mm
• Rear ERD: 517 mm +/- 1 mm
• Wall thickness: 3.8 mm
• Number of holes: 24
• Front rim weight: 505 g
• Rear rim weight: 500 g
• Front wheel weight: 735 g
• Rear wheel weight: 845 g
• Weight per pair: 1580 g
• Hubs: ENVE Innerdrive PRO
• Hub weight: 281 g per set
• Front spacing: 12 x 100 mm
• Rear spacing: 12 x 142 mm
• Spokes: Silver Alpina Ultralite
• Braking: Centerlock disc
• Tubeless rim tape: 39 mm
• Front valve: 80 mm
• Rear valve: 85 mm
• Minimum tire width: 44 mm
• Recommended sections: 44 to 52 mm
• Maximum pressure: 50 psi / 3.4 bar

Why choose the ENVE G SES 6.7 PRO 2026?

• Pair of gravel wheels developed for maximum speed
• Highly aerodynamic profiles of 60 mm at the front and 67 mm at the rear
• Massive 35mm internal width optimized for 44mm tires and larger
• Advertised weight of 1580 g per pair
• ENVE Innerdrive PRO hubs with 40-tooth ratchet
• ENVE PRO Ceramic Bearings
• Wide Hookless Bead technology to prevent pinching
• Silver Alpina Ultralite spokes
• Premium manufacturing in the USA
• An ideal solution for gravel racers seeking maximum aerodynamic efficiency