Fox Transfer Factory 125mm 31.6mm

Fox Transfer 125mm 31.6mm dropper post

The Fox Transfer Factory , here in its version for internal cables, is equipped with a new upper ring and a new carriage which allow a reduction in length and therefore a smaller footprint in the frame. It adopts a multi-position operation with a choice of 100 mm, 125 mm, 150 mm, 175 mm and 200 mm travel for those who need a large saddle exit.

Available in 30.9 mm and 31.6 mm, the Fox Transfer is delivered without handlebar controls because Fox has thought of everything by offering two types of controls (sold separately): a shifter trigger type control with horizontal operation for those who ride 1x and a shifter type control Trigger type with vertical operation for those who ride with a front derailleur.

On the operating side, Fox has focused on reliability by opting for an oil/nitrogen system whose pressure is adjusted at the factory. The return speed is managed directly from the handlebar control depending on the force you exert on the lever

Finally, the Factory version offered here has a Kashima surface treatment and a trigger for internal cables, but a version for external cables is also available.

Features

Material: Aluminum
Travel (C): 100 mm, 125 mm, 150 mm, 175 mm, 200 mm (Multi-positions: you stop the seat post wherever you want)
Length (A): 308.6 mm, 363.5 mm, 418.3 mm, 475.1 mm, 530.6 mm
Minimum saddle exit (B): 138.3 mm, 163.3 mm, 188.2 mm, 213.2 mm, 238.9 mm
Diameter: 30.9mm, 31.6mm
Operation: Hydraulic + Nitrogen
Control: On the handlebars by cable (not included: sold separately)
Return speed: Managed directly with pressure exerted on the handlebar control
Cable: internal
“Micro-adjust” saddle attachment via 2 screws
Treatment: Kashima
Saddle setback: 0 mm
Minimum insertion: 100 mm (150 mm for the version with 200 mm of travel)
Color: Black / Gold (Kashima Coat)

Reference: 925-01-145
EAN13: 0821973383767