Elite Avanti with Zwift Cog and Click

Elite Avanti smart trainer with Zwift Cog and Click

The Elite Avanti with Zwift Cog and Click is a direct-drive smart trainer that combines precision, advanced connectivity, and ease of use. This Zwift Ready version comes with Zwift Cog and Zwift Click pre-installed, allowing you to immediately enjoy 24-speed virtual shifting. With its integrated power meter offering ±1% accuracy, a maximum power output of 2100 W at 40 km/h, and gradient simulation up to 18%, the Avanti is designed for both intensive training and virtual competition.

Product features

• Zwift Cog pre-installed for immediate setup
• Compatible with bikes equipped with 8- to 13-speed drivetrains with the Zwift Cog
• Zwift Click included for managing virtual gear shifting from the handlebars
• 24 virtual reports available on Zwift
• Integrated power sensor with an accuracy of ±1%
• Maximum power of 2100 W at 40 km/h
• Simulation of slopes up to 18%
• Race Mode with data transmission at a frequency of 10 Hz
• Automatic calibration without manual adjustment
• Easy Erg Mode to facilitate resuming intervals after a short interruption in pedaling
• Power Smoothing with four power data display modes in ERG mode
• Supertuck function for quick detection of pedaling stoppage on Zwift
• Built-in Wi-Fi with automatic updates
• Dual-channel Bluetooth allowing simultaneous connection of two Bluetooth devices
• Bridge function compatible with heart rate monitors and cadence sensors
• Option to create a virtual heart rate monitor to transmit data via Bluetooth
• Black Flex Feet included, offering 4.5° lateral oscillation
• Two stand-alone modes allowing training without an app or power supply
• Shimano Di2 pairing function with compatible models
• Integrated handle for easy transport
• Integrated drawer for storing adapters
• Structure delivered fully assembled for Plug & Play installation
• Compatible with Elite Rizer, Elite Aria and Elite Square
• Compatible with Zwift Ride

Technical specifications

• Type: Direct-drive connected home trainer
• Integrated power meter: yes
• Power accuracy: ±1%
• Maximum power: 2100 W at 40 km/h
• Maximum simulated slope: 18%
• Resistor type: electronically controlled magnetic unit
• Flywheel weight: 4 kg
• Weight: 13 kg
• Folded dimensions: 58 x 21 x 52 cm
• Connectivity: ANT+, Bluetooth, Wi-Fi, Ethernet and Zwift
• Race Mode: yes
• Easy Erg Mode: yes
• Zwift Cog: included and pre-installed
• Zwift Click: included
• Number of virtual reports on Zwift: 24
• Zwift Cog compatibility: 8- to 13-speed drivetrains
• Black Flex Feet: included, 4.5° oscillation
• Power supply: included

Compatibility with bicycles and axles

The Elite Avanti is compatible with road bikes, gravel bikes, mountain bikes, and city bikes. With Zwift Cog installed, it offers broad compatibility with 8- to 13-speed drivetrains.

• Quick-release clamp Ø 5 x 130-135 mm: adapter included
• Through axle Ø 12 x 142 mm: adapter included
• Through axle Ø 10 x 135 - 12 x 135 mm: adapter available separately, ref. 1014306
• Specialized SCS Ø 12 x 135 mm: adapter available separately, ref. 1014087
• Boost Ø 12 x 148 mm: adapter available separately, ref. 1014303
• Super Boost Ø 12 x 157 mm: adapter available separately, ref. 1044346

Cassette compatibility

The Zwift Cog can be removed in order to install a traditional cassette and use the Avanti in a classic configuration with compatible indoor cycling applications.

• Shimano / SRAM 9, 10 and 11 speeds
• Shimano road 12-speed
• SRAM SX 12-speed
• SRAM NX 12-speed
• Shimano Micro Spline freehub body available separately, part number 1014315
• Campagnolo freehub body available separately, ref. 1014233
• SRAM XD/XDR freehub body available separately, part number 1014279

Zwift Ready with 24 virtual reports

The pre-installed Zwift Cog simplifies bike setup and allows the use of 8- to 13-speed drivetrains without any drivetrain modifications. Combined with the handlebar-mounted Zwift Click, it provides access to 24 virtual gears for managing gear changes directly during Zwift workouts.

The Cog remains removable. It is therefore possible to remove it to install a compatible traditional 9-12 speed cassette and use the Avanti in a more conventional configuration with other applications.

Accuracy of ±1% and Race Mode at 10 Hz

The Avanti integrates a power sensor directly, offering a claimed accuracy of ±1%. Its electronically controlled magnetic resistance can simulate gradients of up to 18% and support a maximum power of 2,100 W at 40 km/h.

For virtual competitions, Race Mode allows data transmission at a frequency of 10 Hz. Power variations are thus communicated quickly to the platform in order to more responsively reflect changes in intensity during exertion.

Automatic calibration and advanced functions

The Avanti features automatic calibration, eliminating the need for manual calibration before workouts. The Easy Start function makes it easy to resume an interval after a short break from pedaling.

The Power Smoothing function offers four modes for displaying power data in ERG mode via My E-Training. On Zwift, the Supertuck function allows the trainer to almost immediately reduce the detected power when the cyclist stops pedaling so that the platform can quickly recognize this situation.

Flex Feet to follow the bike's movements

The black Flex Feet included with the Avanti allow for 4.5° of lateral oscillation. They move with the bike while pedaling, making your position on the trainer less static. Red Flex Feet offering a different level of rigidity are also available separately from Elite .

Wi-Fi, dual Bluetooth and Bridge function

In addition to ANT+ and Bluetooth protocols, the Avanti features Wi-Fi connectivity, allowing it to be integrated directly into your home network and benefit from automatic updates. Its dual-channel Bluetooth also allows you to connect two Bluetooth devices simultaneously.

The Bridge function allows you to connect a heart rate monitor or cadence sensor to the trainer and transmit their data to the app via FE-C ANT+ or FTMS BLE with a single connection. A wired Ethernet connection is also possible with the separately available Elite Gateway Wired Ethernet Dongle.

Two modes for training without an app

The Avanti features two stand-alone modes. With the trainer powered, it's possible to pre-configure an incline of up to 18%. Without power, the cyclist can choose from 16 resistance levels to continue training without an app.

Compatible with most indoor cycling apps

Thanks to ANT+ FE-C, Bluetooth, and Wi-Fi protocols, the Elite Avanti can be used with leading compatible indoor cycling platforms, including Zwift, My E-Training, MyWhoosh, Rouvy, and Kinomap. It can be controlled from a computer, smartphone, bike computer, or compatible smartwatch.