Pay in 4X without fees from 200 to €2,000 of purchase
If your slopes are more difficult and your requirements higher for your equipment: E 1900 SPLINE 30 from DT Swiss
What used to be classified as a Downhill track, we descend it today in enduro. The trails are getting tougher, and the demands on the gear and the rider are higher. The E 1900 SPLINE was developed precisely to meet these requirements. With its stiff aluminum rim, lightweight Straightpull spokes and renowned DT Swiss hubs, this wheel is up to any challenge. The combination of weight and stiffness will put a smile on your face, uphill and downhill. Because the best trails are often not accessible by lift.
Use: Enduro
Wheel Size: 29"
Tire type: rigid tire or flexible tire
Number of spokes: 28
Brake System: Disc Center Lock (convertible to 6-bolt with adapter)
Wheel Standard: Boost
Tubeless System: Tubeless Ready
Size (ETRTO): 30-622
Rim width, inner: 30mm
Rim width, outer: 35 mm
Rim height: 20mm
Rim material: aluminum
Type: 370
Width: 15 x 110mm thru axle
Bearing: precision bearing, sealed
Hub Body Material: Aluminum
Front wheel interlacing: triple crossed
Spoke Type: DT Champion / Straight pull
Spoke Material: Steel
Nut type: DT ProLock Squorx / ProHead
Nut material: aluminum
Weight limit: 130 kg total weight
Pressure (max.): 4.7 bar
Recommended tire width: 1.85 - 3.50"
- glue type vinyl hub / Waterslide rim
- rigid aluminum rim
- light straight pull spokes
The SPLINE series is characterized by new lightweight Straightpull hubs with the well-known DT Swiss technology, straight pull spokes and robust rims. The combination of reliable and perfectly matched components makes each SPLINE wheel the ideal partner for training and competition.
The DT Squorx Pro Head nut combines ease of assembly and lightness. With additional Torx and square tool holder. The Torx mounting provides a larger contact surface for the wheel, which means that the torque transmitted from the tool to the bit is better distributed. The spherical contact area in the rim guarantees perfect alignment with the spoke.
In order to achieve an ideal weight/stability ratio, many DT Swiss wheels use different shapes of Straightpull spokes. Straightpull spokes do not require a bow and thus eliminate a weak point. They can still be centered and replaced with standard tools.
Tubeless Ready rims are designed for use with tubeless kits and tires. They allow correct adjustment of the tubeless rim tape (use the correct model!) and the tubeless tire.
Data sheet
Specific References
29 inch MTB front wheel
